160 Amp Overhead Busway
The 160 A PowerWave Busway is a flexible overhead power distribution solution which makes adding, removing and modifying your internal power grid easy and cost effective. Detailed below are the specifications of our 160 amp solution.
160 Amp Busway
Distribution Box for 160 Amp Busway
End Feed Box for 160 Amp Busway
| Specifications: | System Rating: | ||||
|---|---|---|---|---|---|
| Ampacity System | 160 A | ||||
| Housing Protection | IP42 | ||||
| Finger Protection | IP2X | ||||
| Busrail Rated Voltage | 208/480V | ||||
| Rated Insulation Voltage | 1000V | ||||
| Voltage Drop / 100′ at 80% Pf | 1.45 | ||||
| Frequency Rating | 50/60 Hz | ||||
| Rated Short Circuit Capacity | 22 KAIC | ||||
| Conductor Type | Copper | ||||
| Copper Dimension per Phase | 3/16″ x 1″ | ||||
| Housing Material | Aluminum | ||||
| Housing Finish | Black, Silver, Optional Colors | ||||
| Dimensions – English | 5.2″ x 2.3″ | ||||
| Dimensions – Metric | 13.2 cm x 5.8 cm | ||||
| Testing Criteria | UL857 | ||||
| CSE Approved | Yes | ||||
| NOM Compliant | Yes | ||||
| IEC Rated | 60439.2 | ||||
| System Weight Per Foot | 6.8 Lbs. | ||||
| Support Distance | 10′ Centers | ||||
| Busrail Lengths | 20′, 12′, 10′, 6′, 5′ and 3′ (foot) | ||||
| Elbows | Left, Right, Down | ||||
| Tees | Yes | ||||
| Cross or “X” | Yes | ||||
| End Feed Units | End, Center (two circuit) dual A&B feed. | ||||
| Hangers | Top and Side Rail Mount | ||||
| Tap Off Boxes | Max 100 Amp | ||||
| Busrail Lengths | 12′, 10′, 6′, 5′ and 3′ (foot) | ||||
| Seismic Rating | Consult Factory | ||||
| Flame Propagation | V0 – Non-Propogating | ||||
| Communications | Yes (optional) | ||||
| Ratings subject to change. | |||||